After the tool is complete a quick check method of inspecting the cavity without having to inspect the actual is to SmartComapre a wax or epoxy pattern although there will be some shrink and shape change this method can be used to quickly quantify any gross deviations from the CAD model. By inspecting the wax or epoxy patterns for correctness prior to casting parts, any issues can be found and resolved quickly and cost effectively. Level 3 Inspection can use White Light Scanning (WLS) with computer-aided-inspection (CAI) to compare the Wax or Epoxy Pattern to the CAD model, other Wax or Epoxy Pattern and wax/epoxies of the same die taken over a period of time, to trend wear. This technology gives our customers a new and profound insight into the size shape and geometric conformance of Wax or Epoxy Pattern that they have never had before. By inspecting and perfecting the actual Wax or Epoxy Pattern Level 3 can help their customers quantify shrink rates, identify problem areas in the die and bring better castings to market, faster than ever before.
CMM captures only a few points in the time that WLS can capture hundreds of thousands, so Level 3 is able to do a more thorough inspection. The results are much more visual and therefore much more easily understood and interpreted.
Inspecting injection molded products with complex free form geometry poses some unique challenges, such as analyzing the complex surface areas. This is difficult using a CMM system, which depends on the operator to accurately capture the points that will show whether or not the part is conforming within the allowable tolerance. Often, there is not enough point data to make an accurate comparison.
The new capabilities provided by computer-aided inspection have not come a moment too soon for the increasingly competitive injection molding and ceramic core market. Increasingly, companies are facing the demand for more quality inspection results in less time.
Level 3 Inspection’s customers are moving quickly to statistically based inspections in which the qualification is based not on a single piece, but on a sampling of parts, new part inspection would take much longer to complete without the ability to automate portions of the process.
Level 3 is replacing the CMM-based process with automated trend analysis. Once a part is scanned and a report is saved, Level 3 can automatically generate portions of the capability studies defined by their customer or OEM specifications. Batch processing enables Level 3 to collect data and generate reports on a large number of parts. Statistical analysis tools allow Level 3 to compare parts for pre-defined factors such as repeatability, changes over time, and variations from part to part.
Speed is the key. Speed of inspection is always Level 3 Inspection’s main challenge. Everyone wants the results yesterday and our process is helping us deliver more complete results much quicker.
Contact us today to start getting superior inspection results in shorter time with easier understanding leading to higher confidence.